|
This Advantage Arms L.E. .22 Conversion Kit is to be used on the following Gen4 GLOCK models: 20, 21, 40 & 41. FOR USE ON GEN 4 MODELS ONLY!
ONE YEAR FACTORY DIRECT WARRANTY THROUGH ADVANTAGE ARMS
Warranty covers any defects in materials or workmanship.
GLOCKMEISTER IS NOT RESPONSIBLE FOR WARRANTY ISSUES. PLEASE CONTACT ADVANTAGE ARMS FOR ANY WARRANTY RELATED ISSUES.
PLEASE NOTE THAT USED KITS CANNOT BE RETURNED OR EXCHANGED.
EXCLUSIVE FEATURES OF THE CONVERSION KIT:
1. ADJUSTABLE SIGHTS
The front and rear sights are removable GLOCK OEM sights. The rear sight is adjustable for both windage and elevation.
2. LAST ROUND LOCK OPEN
The slide will lock open after the last round in the magazine has been fired. Our unique patented magazine design and heat-treated steel lock open insert allows us to offer this special and desirable feature which you can only find on 'Advantage Arms' .22LR GLOCK conversion kits.
3. INTERNAL FIRING PIN SAFETY
Glock incorporated an internal firing pin safety into their guns. We thought it was important enough to include it on our conversion kits as well. Our internal firing pin safety is designed to eliminate accidental discharges from dropping the firearm.
4. FINISH
All Aluminum parts are Anodized Per Mil-A-8625 with a matte black finish. All steel parts are heat treated with a Black Oxide Finish. The barrel is made from heat treated 416 Stainless Steel.
5. THE 10 SECOND INSTALLATION
Installation is simple and does not require any modifications to your GLOCK pistol. Simply remove the GLOCK magazine and slide as outlined in your GLOCK owner's manual. Now slide the "Advantage Arms" slide onto the frame, until it engages with the slide lock. Check to make sure that the slide lock is in its most upward position. Insert the conversion magazine. You are now ready to shoot.
This procedure can be accomplished in less than 10 seconds with some practice.
Advantage Arms conversion kits and their associated magazines are very high demand items. Due to extremely limited production Advantage Arms products are rarely if ever in stock. Back order times for the conversion kits can be months. You are not charged for a back ordered item and there is no penalty to you to allow your order to remain on back order until we are able to fill it in the order it was received.
DO NOT USE STINGER OR ANY OTHER HYPER VELOCITY AMMO. DO NOT USE REMINGTON “THUNDERBOLTS”
Over the years CCI 40 grain round nose MiniMags have proven to be the most consistent and reliable brand of ammo. Other brands tend to vary from one production run to the next, they may work fine one time, however, the next time you buy them you start experiencing feeding and cycling problems. If this happens, it’s more likely the ammo causing the problem and not the kit, in this situation you should try another brand of ammo.
Recommended Ammo for the following kits:
17-22, 19-23, 26-27- CCI MiniMags (40 grain round nose not hollow points), Remington Golden Bullets 550/525 round Bonus Back, CCI Blazers.
20-21, 29-30 - CCI MiniMags (40 grain round nose not hollow points), Remington Golden Bullets 550/525 round Bonus Back, CCI Blazers.
NOT Recommended: CCI MiniMag hollow points, any Winchester ammo, any Federal ammo, Remington Thunderbolts, CCI Stinger or any other hyper velocity ammo.
Note: The Remington Golden Bullets work quite well, however, you will get more light strikes and inconsistent loads than with the other recommended ammo.
|
