How To Clean Your Glock

Keeping your Glock clean and well-maintained is crucial to ensure its optimal performance and longevity. A proper cleaning routine not only enhances its reliability but also ensures your safety while handling the firearm. In this article, we will guide you through the step-by-step process of cleaning your Glock.

From disassembling the components to using the right cleaning solutions and techniques, you'll learn everything you need to know to keep your Glock in top shape. It's time to take charge of your firearm's maintenance and get it cleaner than ever before.

Disassembling Your Glock

Start by sliding out the striker and taking out the extractor plunger. Then, push out the safety pin. With the slide as a support, pull down the striker spring and remove the spring cups. Give a light tap to both the reinforcing pin at the top and the larger trigger pin. Use an armorer's punch to lift out the locking block while holding onto the slide stop. Pull forward on the trigger bar and unhook it from its shelf while also releasing the return spring. Unhook the other end of the return spring from the ejector housing. Push out the connector piece from the back and use a pick to remove the magazine release from its slot. Finally, press on the flat spring and carefully pull out the locking lever.

Every Component of Your Glock

• Barrel
• Connector
• Extractor
• Extractor Depression Plunger
• Extractor Depressor Plunger Spring
• Firing Pin Safety
• Firing Pin Safety Spring
• Firing Pin Spacer Sleeve
• Firing Pin Spring
• Frame
• Follower
• Magazine Catch
• Magazine Catch Slide Lock Spring
• Magazine Floor Plate with Insert
• Magazine Spring
• Magazine Tube
• Locking Block Pin
• Rear Sight
• Recoil Spring
• Recoil Spring Assembly
• Slide
• Slide Barrel
• Slide Cover Plate
• Slide Lock
• Slide Lock Spring
• Slide Stop Lever
• Spacer Clips
• Spring Loaded Bearing
• Trigger Housing Pin (short)
• Trigger Mechanism Housing and Ejector
• Trigger Pin (long)
• Trigger Spring
• Trigger with Trigger Bar

Step-By-Step Cleaning Guide

1. Remove slide:

• Ensuring that the gun is unloaded, lock the slide open and remove the magazine.
• Point the gun in a safe direction, pull the trigger to release the tension, and then press down on the takedown tab on both sides of the frame.
• Slide the slide forward and off of the frame.

2. Disassemble:

• Remove the barrel, recoil spring, and guide rod from the slide.
• For cleaning the frame, use the disassembly tool to remove the takedown lever and slide lock.

3. Cleaning the frame, barrel, and magazine:

• Clean the frame and magazine with a clean cloth soaked in gun cleaner.
• Ensure all the components of the barrel are cleaned thoroughly with the use of a bore brush and cleaner.

4. Cleaning the slide, recoil spring, and guide rod:

• Clean the slide with a clean cloth soaked in gun cleaner.
• Clean the recoil spring and guide rod with a clean cloth soaked in gun cleaner.

5. Lubricate:

• Use the lubricant to apply a thin layer to the slide components, recoil spring, and guide rod.
• Apply a moderate amount of lubricant to the barrel.

6. Reassemble:

• Reassemble the Glock by inserting the guide rod and recoil spring into the slide.
• Insert the barrel into the slide, and place the slide back onto the frame.
• Push the slide back until it locks into place.
• Insert the magazine and perform function checking to confirm the correct reassembly.

Conclusion

In conclusion, maintaining the cleanliness and functionality of your Glock is vital for optimal performance and lasting durability. By following our comprehensive step-by-step guide and using the appropriate cleaning solutions and techniques, you can ensure the reliability and safety of your firearm. Take control of your Glock's upkeep today and achieve a level of cleanliness like never before.

FOR ALL OF YOUR GLOCK CLEANING NEEDS CHECK OUT OUR EXPANSIVE COLLECTION AT GLOCKMEISTER!!